Demo Mode (Special Function For Shop Floors) - Pando PHB-961 Manuel D'utilisation

INOXPAN S.L. EN - 19

9. DEMO MODE (SPECIAL FUNCTION FOR SHOP FLOORS)

With the DEMO mode activated, you can control the oven without heating.
Activating this mode is recommended if the oven is to be plugged in at a showroom.
Activation of the DEMO mode. This operation must be done before setting the clock.
Simultaneously pressing the touch and for about 3 seconds, we will activate the mode
SHOWROOM or DEMO. On the display we can visualize for 2 seconds the word "Sho":
To deactivate DEMO mode, unplug the oven from the mains.
To deactivate, if the clock has not been set, just press the sequence mentioned again. In the event
that the clock has been set, the oven must be disconnected from the mains (when connected again,
it will return to the original state).
By default, the DEMO mode is disabled.