Pando PHB-961 Manuel D'utilisation page 79

INOXPAN S.L.
PROGRAMMING COOKING TIME AND COOKING END TIME
1. Touch or
indication '00:00' will appear on the display
2. Select the cooking time by touching
time will appear on the display and the
3. Touch or
see the expected completion time on the timer display
4. 4. Select the cooking end time by touching
current time will be displayed on the display.
5. Select a cooking function and temperature. The oven will remain disconnected with the
symbols lit up. The oven is now programmed.
6. When it is time to start cooking, the oven will turn on and will operate for the programmed cooking
time.
7. While cooking, the cooking time remaining will be displayed and the
8. When the cooking time is up, the oven will turn off, a buzzer will sound, and the
flash quickly.
9. Touch any sensor to stop the buzzer and turn off the
again.
10. Set the controls to the
You can change the remaining cooking time at any time by touching
starts to flash quickly. Now press
until the symbol on the display starts flashing, then press
until the symbol on the display starts flashing, then press
position to turn off the oven
to change the time.
or . Next, a double beep will sound, the remaining
symbol will flash slowly.
or . Next, a double beep will sound and the
symbol. The oven will switch on
EN - 12
. You will
symbol will flash slowly.
symbol will
or until the symbol
. The
and