Installing Your New Appliance - Brandt BFD663ZNX Manuel D'instruction

Installing your new appliance

Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order
efficiency of the cooling
system and save energy, it
is necessary to
ventilation around the appliance for
the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Suggestion: it is recommended to
have at least 75mm of space between
the back of the appliance and the
wall, at least 100mm from its top, at
Relevant information
Constant
/mm W
Model
RD- 790
63WR4SZ
Note:
This appliance performs well within
to improve
maintain good
W1 D D1
638 600 1416
last 100mm from its side to the wall
and a clear space in front to allow the
doors to open a 145° angle. See the
following diagrams.
the climate class shown in the table
below.
It may not work properly if left at a
temperature above or below the
indicated range for a long period.
Climate class Ambient temperature
SN
N
ST
T
●Place your appliance in a dry place
to avoid high moisture.
● Keep the appliance out of direct
sunlight, rain or frost. Place the
appliance away from heat sources
such as stoves, fires or heaters.
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
6