Brandt BFD663ZNX Manuel D'instruction page 60

Before using
● Before using this appliance for the
first time, you should use it as
follows.
1. Tightly old the two sides of the
water tank , then lift it up and pull
the tank out.
2. Unscrew the head, to clean it,
and the in side of the water tank.
● Assembling
After cleaning, please assemble
the parts including the head,
water tank a n d lids together,
then fit them onto the door.
Warning!
When fitting
ensure the head is inserted into
the hole first, then hold the two
sides of the water tank tightly
and fit it onto the door.
● Filling water
Before you fill the drinking water
into the water tank, ensure that
the water tank is steady and in a
correct position.
Caution!
Fill with water
(suggested amount)
above the level. Otherwise, it may
overflow when the lid is close.
We recommend that you fill the
t a n k u p w i t h
following way.
1. Remove the small lid and fill
water from the inlet of the large
lid.
2. Remove the cover of the tank,
and then fill water inside directly.
the water tank,
up to 2.5L
and not
water in the
13