Hw223E; English Gb - Honeywell HW223E Mode D'emploi

ENGLISH GB

IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions
before starting to use the appliance. Keep
this manual in a safe place for future
reference.
These instructions are also available on
our website. Please visit
www.hot-europe.com.
• This appliance must only be operated
as instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance.
• Children of less than 3 years should
be kept away unless continuously
supervised. Children aged from 3
years and less than 8 years shall only
switch on/off the appliance provided
that it has been placed or installed in
its intended normal operating position
and they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children aged
from 3 years and less than 8 years
shall not plug in, regulate and clean the
appliance or perform user maintenance.
• CAUTION — Some parts of this product
can become very hot and cause burns.
Particular attention has to be given
where children and vulnerable people
are present.
• Never position this appliance
immediately underneath a power
socket.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
• DO NOT COVER WARNING: In
order to avoid overheating, do not
cover the heater with anything, as
indicated by the symbol. This can lead
to overheating, fire or electric shocks.
Ensure that the air intake and outlet
vents are not obstructed.
• The appliance is intended only for
use indoors, not for outdoor use or
commercial use.
• Do not use the appliance anywhere near
easily flammable gases or substances
such as solvents, lacquers, glues, etc.
Some of the internal parts can be hot
and could throw sparks.
• Keep flammable materials at least
100cm away from the heater. To
prevent burns, do not allow bare skin to
come in contact with hot surfaces.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Never touch the unit with wet hands.
• Check for any obstructions. If you
find an obstruction, turn off the
heater using the power button on
the control panel. Allow the heater
to cool completely, then remove the
obstruction. Wait at least 10 minutes,
then turn on the heater and follow the
instructions for use.
COMPONENTS
(See page 2)
1. Air inlet grille
2. Air outlet grille
3. Power setting knob
4. Thermostat knob
5. Handles
6. Feet
7. Feet assembly screws
8. Storage spacers
9. Power cable
4
ASSEMBLY
(See page 3)
This heater may be used with feet on the floor.
FOOTSTAND INSTALLATION
1. For floor use, attach the feet to the lower part of the heater by snapping
each foot into the matching holes (fig. 1). Respect the "L" (left) and "R"
(right) positions for the feet.
2. As shown in fig. 1A, please tighten the feet at the bottom of the heater
using the feet assembly screws provided.
3. Place the heater on a firm, level, open surface at least 90cm away from
any other object. DO NOT use on an unstable surface such as bedding
or deep carpeting.
POWER CABLE WINDING
(See page 3)
• If you want to wind the power cable on the heater when not in use, mount
the storage spacers at the rear side of the heater.
• Wind the power cable around the storage spacers (fig. 2).
• When you wish to use the heater, you must completely unwind the power
cable. An incompletely unwound power cable can lead to overheating and
cause a fire.
OPERATING INSTRUCTIONS
(See page 2)
• Turn the power setting knob counterclockwise to the (š) position.
• Plug the heater power cable into an outlet.
• Turn the power setting knob to the desired power setting (fig. 3):
= Low – 600W
= Medium – 900W
= High – 1500W
• Turn the thermostat knob clockwise to the highest temperature setting for
rapid warming.
• When the room reaches a comfortable temperature, turn the thermostat
knob counterclockwise until the heater switches off (a click is heard and the
pilot light goes off). At this setting, the thermostat will automatically turn
the heater on (the pilot light illuminates) and off (the pilot light goes out) to
maintain the selected temperature.
• To turn the heater off, turn the power setting knob to the (š) position and
unplug the heater.
AUTOMATIC ANTI-FROST FUNCTION
The heater is equipped with an automatic anti-frost function. Plug in the
heater. Turn the power setting knob to any of the active settings ( , or ).
Turn the thermostat knob counterclockwise to its lowest setting, indicated by
the snowflake icon ( ).
As soon as the room temperature is below + 5° C the heater will automatically
switch on. As the heater will automatically turn on in anti-frost mode, make
sure the heater is not covered or obstructed by any object.
AUTOMATIC SAFETY CUT-OUT
This heater is equipped with an automatic safety cut-out. If the heater stops
unexpectedly, the safety cut-out may have operated. Once the safety cut-out
has operated, the heater will not restart until the heater has been turned off
and cooled down. In this situation, you must turn the power setting knob to
the (š) position and unplug the heater. Allow the heater to cool, then follow
the "Operating Instructions".
TIP-OVER SWITCH
The heater is equipped with an automatic tip-over switch that will disable the
heater if it is accidentally tipped over.
ENGLISH GB
IF THE HEATER FAILS TO OPERATE
• Check for and remove any obstructions.
• Check if the heater is in the standing position.
• Check if the heater is plugged in. Also check if the power socket is working
(e.g. plug in a different working electrical device).
• Make sure that the thermostat is not set too low. With the power setting
knob set to one of the active settings ( , or ) turn the thermostat knob
clockwise until the heater turns on again (pilot light illuminates).
• If the heater still does not work, consult the warranty for further
instructions.
CLEANING
We recommend you to clean the appliance twice a year (or before if you notice
performance to be impaired) with a vacuum cleaner.
1. Unplug the unit.
2. Allow it to cool down for 20 minutes.
3. Use a vacuum cleaner to suck out dust and dirt from both grilles.
MAINTENANCE
In the event of overheating, the safety system will automatically turn off the
heating elements and/or the motor, if any. If this happens please remove
any obstacles to the air outlet grille and clean the unit as indicated under
cleaning instructions.
DISPOSAL
This appliance complies with EU legislation 2012/19/EU on end of
life recycling. Products showing the 'Crossed Through' wheeled bin
symbol on either the rating label, gift box or instructions must be
recycled separately from household waste at the end of their useful
life.
Please DO NOT dispose of appliance in normal household waste. Your local
appliance retailer may operate a 'take-back' scheme when you are ready to
purchase a replacement product, alternatively contact your local government
authority for further help and advice on where to take your appliance for
recycling.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes responsibility for the correct
use and care of this Kaz product according to these user instructions. The
purchaser or user must himself or herself decide when and for how long this
Kaz product is in use.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT, PLEASE
OBSERVE THE INSTRUCTIONS IN THE GUARANTEE CONDITIONS. DO
NOT ATTEMPT TO OPEN OR REPAIR THE KAZ PRODUCT YOURSELF, AS
THIS COULD LEAD TO TERMINATION OF THE GUARANTEE AND CAUSE
DAMAGE TO PERSONS AND PROPERTY.
This product carries the CE mark and is manufactured in conformity with
the Electromagnetic Directive 2014/30/EU, the Low Voltage Directive
2014/35/EU, the RoHS Directive 2011/65/EU and the Energy Using
Products Directive 2009/125/EC.
Technical modifications reserved

HW223E

220-240V ~ 50Hz
1500W
This product is only suitable for
well-insulated spaces or occasional use.
5