dji MAVIC PRO Guide De Démarrage Rapide page 9

7. Flight
The default flight control is known as Mode 2. The left stick controls the
aircraft's altitude and heading, while the right stick controls its forward,
backward, left and right movements. The gimbal dial controls the
camera's tilt.
Left Stick
Before taking off, make sure the Aircraft
Status Bar in the DJI GO 4 app or on
the Remote Controller LCD screen
displays 'Ready to Go'.
Combination stick
command to start/stop
the motors.
Left stick up (slowly)
to take off
The motors can only be stopped mid-flight when the flight controller detects critical
error.
Right Stick
Ready to Go (GPS)
OR
Left stick down (slowly) until
you touch the ground
Hold a few seconds to stop
the motors
7