dji MAVIC PRO Guide De Démarrage Rapide page 8

5. Prepare the Aircraft
Remove the gimbal
clamp from the
camera
Unfold the front arms
and the propellers
Unfold the front arms and the propellers before the rear ones. All arms and
propellers must be unfolded before takeoff.
The gimbal cover is used to protect the gimbal. Remove it when necessary.
6. Prepare for Takeoff
Power on the
remote controller
Use your DJI account to activate the aircraft. Activation requires an internet
connection.
Internet
The Mavic Pro can be controlled using the Remote Controller or Virtual Joysticks.
Select control modes by toggling the Control Mode Switch. Only toggle this switch
when the aircraft is powered off.
6
Marked Unmarked
Match propellers to motors
Unfold the rear arms
and the propellers
Power on the aircraft
Press the propeller
down firmly and rotate
in the lock direction
Unfolded
DJI GO 4
App
Launch the DJI GO 4 app