Correct Exposure Display; Flash Mode Display; Camera Viewfinder Display - Metz MECABLITZ 44 AF-1 digital Mode D'emploi

4.2 Correct exposure display

When the shot is correctly lit in TTL ope-
rating modes, the correct exposure is
displayed by means of the button
lighting up for 3 seconds.
If there is no correct exposure message
after the shot, it was underexposed and
you must select the next smallest f-stop
(e.g. f-stop 8 instead of 11) or decrease
the distance to the subject or reflective
surface (e.g. for bouncing flash) and
take the shot again.
See section 5 for further info. on correct
exposure display in viewfinder.

4.3 Flash mode display

The configured operating mode will be
shown by the appropriate illuminated
LED e.g. TTL mode.

5 Camera viewfinder display

Examples of camera viewfinder display:
SL
M
Illuminated green flash symbol
TTL
Ready for use – flash unit can be swit-
ched on.
Illuminated red flash symbol
Flash unit is ready.
Red flash symbol
after shot or only goes off briefly
The shot was correctly exposed.
Red arrow symbol
The shot was underexposed.
SL
M
Check which viewfinder display messa-
ges apply to your camera model in the
TTL
camera operating instructions.
still illuminated
flashes after shot
89