Operating Irregularities - Casselin CLVAD Mode D'emploi

6. OPERATING IRREGULARITY
ANOMALY
The appliance does not work,
the heating indicator light does
not come on.
The appliance is on but it does
not heat up. The heating
indicator light remains off.
The requested temperature is
not reached.
The heating element stops
after a certain time.
NOTE
The above-mentioned malfunctions are only cited as an indication and remain virtual. For any hesitation,
contact your dealer.
NOTE
Waste from used devices: any used device must, when disposing of it, comply with the regulations in force
in its country *. It is essential to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling
CAUSES
> The power cable is not plugged in.
> The power supply fuse has tripped.
> The power supply unit does not
work.
> The safety thermostat has tripped.
> The safety thermostat is damaged.
> The safety thermostat has started
up.
> The resistance no longer works.
> Contact with damaged heating
element.
Thermostat is damaged.
The safety thermostat has started
up.
EXPLANATION
> Connect the power
properly.
> Check all of your fuses.
> Check the location of the box.
> Press the reset button located in
the box.
> Contact your dealer.
Contact your dealer.
Contact your dealer.
Press the Reset button in the
distribution box.
EN
cable