Each time the machine is switched off with button A-1, when switching on, the machine will return to the
EN
last washing cycle carried out. This also takes place when using programs with automatic machine
shutdown such as regeneration.
Except for the continuous washing which is never proposed again on ignition. If the switch is turned off by
cutting the power with the wall switch, when switching on the machine will go to the medium wash cycle.
Program selection can only be made with the machine stopped. Regardless of the cycle in progress, the
program selection key (A-3) is deactivated.
Washing advice
Never immerse your bare hands in the washing water. If this should happen, rinse immediately and
thoroughly under cold water. Place the dishes, cups, glasses and cutlery in their baskets (B). Place the
dishes in the special basket with support rods, the inside facing up.
Place the cutlery with the handle down. It is advisable to wash glasses and glass containers at the start of
work or after changing the water in the tank. To save detergent and electrical energy, we recommend
washing only once the baskets are full, taking care not to overload them. Avoid stacking dishes. In order to
minimize machine maintenance and substantially improve the quality of the final result.
IT IS RECOMMENDED TO CLEAN the dishes before putting them in the machine, removing any paper,
lemon slices, toothpicks, olive stones, etc., which could clog the filter in the tank and thus reduce the
washing efficiency. It is also advisable to wash the dishes before any residue that may be on them dries.
If necessary, soak the dishes in soapy water for a few minutes before putting them in the machine.
OPERATION
Open the tap, activate the main switch attached to the wall
Device startup, press for one second