hager EK860 Mode D'emploi page 30

z
5.4 Selecting Hot Water Settings
Selectable
*HW 
range
HW 
5.5 Selecting Extension Box Option
Selectable
*EK 
range
EK 
5.6 Selecting Extension Box Interface (if installed)
Selectable *R01-R10
range D01-D75
A01-A15
5.7 Selecting Extension Box Heating Circuit (if installed)
Selectable *HC--
range HC00-HC10
For relay interface with one heating zone, leave the default setting HC--.
P
5.8 Saving Settings and Leaving the Installer Menu
Selecting "SAVE"-
settings will be saved,
"BACK" - to main menu
start. Confirming by
pressing the button.
30
Hot water control deactivated
Hot water control activated
Extension Box not installed
Extension Box installed
R.. relay interfaces
D.. digital interfaces
A.. analog interfaces
No heating circuit selected
Heating circuit 0-10
Saving configuration
settings.
Settings have successfully
been saved.