Configuring - hager EK860 Mode D'emploi

z
Smart Thermostat
Check that the "link"-LED
on the Bridge is flashing
link
link
router
router
internet
internet
:hager
Extension Box
link
Check that the "link"-LED
link
router
router
on the Bridge is flashing
internet
internet
:hager
link
link
link
router
router
link
router
internet
router
internet
internet
internet
:hager
:hager
Pairing can be disrupted by other radio networks and it may be that it is not successful
P
on the first attempt. In this case the pairing can simply be started again by repeating the
link
process shown above.
link
router
router
internet
internet

5. Configuring

:hager
Before Smart Thermostat can be used, it has to be configured. This includes setting the
correct interface configuration and the hot water settings.
link
28
link
router
router
internet
internet
Press the button for 5s
until the antenna appears,
then the button is released.
Press button for 5s
until the LED flashes rapidly,
then release button.
Pairing has been successful
when a tick is displayed.
The temperature will now
be displayed.
Pairing has been successful
when the LED starts to gently
fade in and out pulsing light.