hager EK860 Mode D'emploi page 24

z
Once stage 3 has been reached then the installation can proceed.
P
The "link" LED will be solid at first until the other lights are also solid and then it will switch
to flashing to indicate that pairing mode is active
The LEDs on the Bridge do not light up directly after plugging the Bridge in.
P
What can be done?
This indicates that the Bridge is not sufficiently supplied with power. In this case, the
z
Bridge has to be powered by another source (USB port/wall socket).
If the power supply has been tested and confirmed and the LEDs still do not light up,
please contact the Hager support team.
Bridge Status LEDs
LINK LED ACTION
link
link
router
router
internet
internet
:hager
link
ROUTER LED ACTION
link
router
link
router
internet
internet
link
router
router
:hager
internet
internet
:hager
link
link
router link
router
internet
link internet
router
router
:hager internet
internet
:hager
link
link
router
router
internet
internet
link
:hager
link
router
router
internet
internet
:hager
INTERNET LED ACTION
link
link
router
router
internet
internet
:hager
link
link
router
router
internet
internet
:hager
24
Off
Blinking (fast)
Off
Blinking
On
Off
Blinking
On
MEANING
No power
Pairing
MEANING
No ethernet link detected
Ethernet link detected.
Awaiting DHCP IP address assignment
IP address assigned successfully
MEANING
Off until IP address has been assigned
Establishing connection to Server
Connection to Server
has been established