Brandt BFC38NW Guide D'installation Et D'utilisation page 33

9. REVERSE THE DOOR
13. Upturn the middle hinge part the direction
180 degree, transfer it and adjust its
position ,Make the middle hinge axis into
the upper hole of the lower door, tight the
bolts.
14. Transfer the upper door to the appropriate
position. Secure the door's level; make
the middle hinge axis into the lower hole
of the upper door.
15. Transfer the upper hinge part and make
the upper hinge axis into the upper hole of
the upper door,and adjust the position of
the upper door(please support the upper
door with your hand when doing it),fixing
the upper hinge part with the special
flange selftapping screws.
upper hinge part
16. Install the screw hole cover on the top
right corner of the refrigerator. Install the
upper hinge cover (which is in the plastic
bag) on the left corner and screw it. Put
the other upper hinge cover into the
plastic bag.
screw
17. Open the upper door and install the door
shelves, then close it.
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
handle
handle
33
EN
screw hole
upper hinge cover (left)
cover