Brandt BFC38NW Guide D'installation Et D'utilisation page 25

3. CONTROL PANEL
Before changing the LED light part, either
the refrigerator or disconnect the electricity
leading into the refrigerator at the mian
power supply.
Failure to do so could result in electrical
shock or personal injury.
1. Remove the decorative button, unscrew
the self-tapping screw which fixing the
light cover;
2. Remove the light cover, unscrew the
selftapping screw which fixing the
refrigerator air duct cover part;
3. Pull out the LED light part connector ;
4. Unscrew the self-tapping screw which
fixing the LED light part, replace it with a
same;
5. Fix the refrigerator air duct cover part,
connect the LED light part connector;
6. Fix the light cover;
7. Fix the decorative button.
light cover
decorative button self-tapping screw
25
EN
self-tapping screw