Storing - Elmo TT-02 Mode D'emploi

3

STORING

Storing
1
Turn the power switch of the main unit
OFF
(Continuously press the power switch for
approx. 2 sec. The green light turns to red and
the power switch of the main unit is OFF.)
Note
• Before storing, be sure to check if the
lens returned to the proper position after
the power switch of the main unit is OFF.
2
Unplug the AC adapter and the video
cable.
3
Turn the camera head to the direction
shown in the figure.
Note
• Proper storing position of the camera head is as shown in the figure on the right.
Never apply excessive force to the camera head.
• Pay attention to prevent the camera head from knocking against desk or the like.
• Unplug the AC adapter when the unit is not used.
English P1~P32
90°
17