Elmo TT-02 Mode D'emploi page 13

The top hierarchy The 2nd hierarchy
White Balance Auto
One-Push
Manual
R-Gain (Displayed in level bar)
B-Gain (Displayed in level bar)
Posi/Nega Posi
Nega
Color/B&W Color
B&W
Edge Effect 3
2
1
Off
Gamma High
Normal
Low
Preset 1
2
3
Power On
Call 1
2
3
Power On
Default
Guide On
Off
Language English
Japanese
* [ ] shows factory default setting.
English
Function
To set the white balance to Auto.
To set the white balance to One-Push.
To manually adjust the red/blue
elements.
To adjust the red element when the
white balance is set to Manual.
To adjust the blue element when the
white balance is set to Manual.
To switch the Posi/Nega of the camera
image.
• Factory setting for Nega
Gamma: Normal
To switch the color/B&W of the camera
image. Use this function to make B&W
document easy-to-read.
To set the level of edge enhancement
when the "Graphics" mode is selected.
The larger the fi gures is, the higher the
effect is.
To set gamma curve when the
"Graphics" mode is selected. Tone
wedge can be changed depending on
user's preference.
To save the setting in the selected
memory.
To call the setting saved in the selected
memory.
To set whether the operation state of the
main unit should be displayed on the
screen or not.
To set the language for the OSD menu.
P1~P32
P.28
P.28
P.28
P.29
P.29
13