Osd (On Screen Display) - Elmo TT-02 Mode D'emploi

OSD (On Screen Display)

The menu items displayed/selected on the monitor or the projection screen are referred to as
"OSD (On-Screen Display)."
When the [MENU] button is pressed, the OSD menu appears on the monitor screen. (By
pressing the [MENU] button again, the OSD menu disappears.)
Move the cursor to the item to be set with the direction buttons [
button [ ] to decide setting. Pressing the direction button [ ] moves the cursor back to
the OSD menu by one hierarchy. Pressing it on the top hierarchy allows the OSD menu to
disappear.
The top hierarchy
Focus
Brightness
Mode
Pause
Image Rotation
Microscope
* [ ] shows factory default setting.
12
SELECT MENU OK
Focus
Auto
Brightness
Mode Manual
Pause
The 2nd hierarchy
Image Rotation
The top hierarchy
The 2nd hierarchy
(Displayed in upper/lower
arrows ( F, N))
Auto
Manual
Text3
Text2
Text1
Graphics
On
Off
On
Off
Set
Off
] and press operating
Function
To focus manually.
Mode to change brightness which
automatically follows the object.
Mode to fi x the brightness of the image
to a specifi c level.
To sharpen B&W characters and lines
of image. The larger the fi gure is, the
higher the effect is. When setting this
mode to "Graphics", color image such
as a color drawing and a photo can be
shown vividly. Edge enhancement and
gamma settings can be set only when
this mode is set to "Graphics."
To pause the camera image.
To rotate the camera image by 180°
when this function is On.
Mode to shoot the microscope.
P.24
P.26
P.26
P.20