Appendix Ii; Dodatok Ii - Hedson IRT 4-20 PCAUTO Manuel D'installation

Masquer les pouces Voir aussi pour IRT 4-20 PCAUTO:

Table des Matières

Acceptance test carried out by the responsible electrician prior to commissioning

Electric component:

Visual inspection

– Supply point correctly fused

– Main cable to local isolating switch 4 x

– Protected main connection boxes

– Sealing conductor lead-ins

– PE and other connection boxes safely connected

– Correctly connected conductor rail

– Conductor rail IP 4 x

– Correctly connected conductor rail

– Traverse IP 4 x

– Correctly connected control unit

– Ground screw (see 4.2.8.3 item )on bottom

of control unit installed

– Measurements according to EN 60204-1 / VDE 0113-1,

Chapter 18 Carried out by measuring instrument

(manufacturer, model, serial no.)

....................................................................Reading:..............................................................

– Performance test:

Switch on main breaker and run a curing cycle.

See instruction manual.

713683 rev 8

GB - APPENDIX 2

..... A

.... mm²

(PE!)

Yes

Table des Matières

Irt 4-10 pcauto Irt 3-20 pcd