Bushnell 119519 Mode D'emploi page 23

Parameter
Time Lapse
Video Sound
(only affects
video clips in
Video or Hybrid
modes)
Default Set
Settings
(Bold=default)
On, Off
On, Off
Cancel,
Execute
Description
Turns Time Lapse recording mode
on/off. Pressing OK with On
selected will go to the Set Time
Lapse screen, which allows you
to set the Start and Stop times in
hours (0-24) and minutes (00-59).
This is setting the time each day for
recording to begin and end (24-hr
clock, so 13:00 hours=1PM). Use
the RIGHT key to step through
the fields, and use UP/DOWN to
change the settings. After you set
the "Stop" minutes, the next press
of the RIGHT arrow key will jump
to the screen for setting the Inter-
val (how often the Surveillance
Cam will wake up and record). You
can select 60, 30, 15, 5 minutes
(default) or 1 minute (photos only).
Select "On" to record audio along
with the video when the camera is
set to video mode (saved file sizes
will be slightly larger).
Select "Execute" and press OK
to restore all parameters to the
original factory default settings.
If the camera is behaving oddly
and you think you may have
changed the setting for something
accidently (but aren't sure which
one), this will reset all parameters
to their most commonly used or
"generic" settings.
23