Bushnell 119519 Mode D'emploi page 19

Parameter
LED Control
(Multi-Flash
feature)
Video Size
(only affects
video clips)
Video Length
(only affects
video clips)
Settings
(Bold=default)
Low, High
High, Low
10S (second)
default, with
60S to 5S
possible range
Description
Controls how many LED lamps fire
when images are taken in low light.
"High"=all 20 LEDs fire, which
is the default setting. Set to Low
(only 8 LEDs fire) if you are getting
overexposed flash photos or will
place the camera at very close
range to the subject you want to
photograph. In general, select High
if most of your intended subjects
will be over 30 ft. from the camera,
and Low for subjects under 15 ft.
away.
Selects video resolution (in
pixels per frame( High=720x400,
Low=352x192 (both @ 30 fps).
Higher resolution produces better
quality videos, but creates larger
files that take up more of the SD
card capacity (fills up faster).
Sets length per captured video
clip. Settings begin with 10
second default when parameter is
first selected. After stepping down
to 5S, video length settings start
over at 60S.
19