Bushnell 119519 Mode D'emploi page 22

Parameter
Image
Recycle
Time Stamp
(only affects
still photos)
Set Clock
22
Settings
(Bold=default)
Off, On
(NOTE: setting
to "On" not
recommended
when using SD
cards of 16GB or
higher capacity)
On, Off
Set
Description
If set to "On", once the SD card
(or internal memory) is full, newly
captured photos or videos will
start replacing previous image
files, beginning with the oldest.
The memory will continue to be
used up to full capacity until the
camera is switched off, but only
the most recent photos/videos will
be saved.
Select "On" if you want the date &
time (that the photo was captured)
imprinted on every photo, select
"Off" for no imprint.
Press OK and use the UP/DOWN
keys (to change the setting) and
LEFT/RIGHT keys ( to move
to the next field) to set the hour
(24-hr format only, "00"=midnight,
"12"=noon) and minute, and then
(on the lower row), the year, month
and date.