Silk-n Jewel H3210 Mode D'emploi page 5

If the device has come into contact with
U
water, disconnect it immediately from the
electricity supply before touching it.
Never use the adapter if it has a damaged
U
cable or plug, or isn't working properly,
or has been submerged in water. If that
happens, unplug the adapter immediately
before touching it. Failure to unplug the
adapter may result in an electric shock!
Do not operate the device in environments
U
where there is a risk of explosion. Keep the
device and all its parts away from open
flames and hot surfaces.
Never leave the device unattended when
U
connected to the electricity supply. Keep
the adapter accessible at all times, so it can
be removed from the electricity supply
easily in case of emergency.
Always switch the device off and disconnect
U
it from the electricity supply when you are
not using the device, when you intend to
clean it, or in the event of a fault.
Never pull the adapter out of the socket by
U
the cable. Always remove it by taking hold
of the adapter.
Place the adapter cable in such a way that it
U
does not pose a tripping hazard.
3
EN