Silk-n Jewel H3210 Mode D'emploi page 18

7.3 Pulsing and gliding
EN
Pulsing is the best technique for treating specific spots or
small areas.
U
Press the treatment surface against your skin. Work in
rows (either across or down as shown in the image). Start at
one end of each row and progress to the other end.
U
The treatment surface creates temporary pressure marks
on the treated area so you can see areas you have treated.
U
After each pulse, move the treatment surface to the next
spot. Keep doing this pulsing action for the area you are
treating.
U
Avoid gaps or overlaps as you use the device.
Gliding is the best technique for treating larger parts of
the body.
U
Press the treatment surface firmly against your skin and
slowly glide over your skin (either across or down as shown
in the image). Make sure that the treatment surface is
always touching your skin.
U
At lower energy levels, the device takes only 1-1.5 seconds
to recharge between pulses. This generates a nonstop
sequence of flashes.
U
Glide at a speed so that you avoid gaps or overlaps.
C
Do not treat the same area of skin more than once per hair
removal session.
16