Using The Controls - Amana NDE2330AYW Guide D'utilisation Et D'entretien

Using the Controls

STEP 1
Select Temperature
To select the correct temperature, turn the temperature
control to one of four choices; Air Fluff, Handwash, No
Iron or Regular.
DRYER TEMPS
Air Fluff
Handwash/Low
No Iron/Medium
Regular/High
STEP 2
Select Extended Tumble
if desired, (select models)
When using No Iron and Regular cycles, Extended
Tumble helps to reduce wrinkling after the normal
drying cycle. After the Cool Down portion of the cycle,
the dryer continues to tumble clothes without heat for
approximately 30 minutes, until the dryer door is
opened, or the switch is turned to the OFF position.
STEP 3
Select Signal
End of Cycle Signal
Shortly before the cycle is complete, an audible signal
will sound. During the Cool Down portion of the No
Iron Fabrics cycle, the audible signal will sound
intermittently.
3
LOAD TYPE
Tumbles without heat.
Used for sensitive loads
or items needing
freshening.
For heat-sensitive items
labeled "Tumble Dry
Low" or "Tumble Dry
Warm. "
For permanent press,
synthetics, lightweight
cottons or items labeled
"Tumble Dry Medium. "
For sturdy cottons or
those labeled "Tumble
Dry. "
(select models)