Cleaning And Care - Unold 68860 Mode D'emploi

CLEANING AND CARE

Always unplug the plug from the electrical outlet before cleaning.
1. Take the appliance apart in the reverse sequence:
2. For safety reasons the lid has a locking mechanism. To take off the lid, first
press on the „Öffnen" (Open) button. The locking mechanism disengages,
the lid can be removed.
3. Release the locking levers of the panel by turning them anti-clockwise and
take off the panel.
4. Take off the pasta die and unscrew the screws of the front cover.
5. Pull the kneader out of the kneading container.
6. Remove flour residues in the housing with a dry cloth.
7. Kneading container, kneader, front attachment, panel, and the pasta dies
can be cleaned in lukewarm rinsing water. If necessary let the parts soak
in the rinsing water for a few minutes to soften dough residues for easier
removal.
8. Do not immerse the housing in water or other liquids.
9. The appliance must be completely dry before it can be used again.
10. When completely dry, store the appliance in a dry, safe place so that it is
protected from dust, shocks, heat and moisture. Tip: Store the appliance in
the original box.
11. Tip: To save space the pasta dies can be stored in the drawer of the appliance.
Copyright UNOLD AG | www.unold.de
41