Table des Matières
Publicité
Technical Information
6. T
ECHNICAL
Product
Maintenance
-36-
I
NFORMATION
To maintain optimum performance and minimize wear, you should clean this product frequently.
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4.
Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.
5.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6.
Wipe any dirt or grime to the outside edges of the lens surface.
7.
Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not spin the cooling fans by blowing compressed air into them.
NEXT NXT-1 User Manual Rev. 7
Publicité
Table des Matières
