Witbalans; Dimmer-Snelheidsmodus; Temperatuur-Instelling; Ventilatormodus - Chauvet Professional NEXT NXT-1 Manuel D'utilisation

Masquer les pouces Voir aussi pour NEXT NXT-1:
Table des Matières

Publicité

Werking

Witbalans

Dimmer-
snelheidsmodus
Temperatuur-
instelling

Ventilatormodus

-152-
Om de witbalans in te stellen van de NEXT NXT-1:
1.
Druk herhaaldelijk op <MENU/ESC> om naar het hoofdniveau van het displaymenu te
gaan.
2.
Gebruik <UP> of <DOWN> om System Setup te selecteren.
3.
Druk op <ENTER>.
4.
Gebruik <UP> of <DOWN> om White Balance te selecteren.
5.
Druk op <ENTER>.
6.
Gebruik <UP> of <DOWN> om te kiezen tussen Red, Green, of Blue.
7.
Druk op <ENTER>.
8.
Gebruik <UP> of <DOWN> om de kleurwaarde te verhogen of te verlagen, vanaf 125-255.
9.
Druk op <ENTER>.
Om de dimmersnelheidsmodus in te stellen:
1.
Druk herhaaldelijk op <MENU/ESC> om naar het hoofdniveau van het displaymenu te
gaan.
2.
Gebruik <UP> of <DOWN> om System Setup te selecteren.
3.
Druk op <ENTER>.
4.
Gebruik <UP> of <DOWN> om Dimmer Mode te selecteren.
5.
Druk op <ENTER>.
6.
Gebruik <UP> of <DOWN> om te kiezen uit Off, Dimmer 1 (snel), Dimmer 2 (gemiddeld),
of Dimmer 3 (langzaam).
7.
Druk op <ENTER>.
Om te selecteren in welke eenheid de producttemperatuur weergegeven moet worden:
1.
Druk herhaaldelijk op <MENU/ESC> om naar het hoofdniveau van het displaymenu te
gaan.
2.
Gebruik <UP> of <DOWN> om System Setup te selecteren.
3.
Druk op <ENTER>.
4.
Gebruik <UP> of <DOWN> om Temperature Unit te selecteren.
5.
Druk op <ENTER>.
6.
Gebruik <UP> of <DOWN> om te kiezen tussen °C (Celsius) of °F (Fahrenheit).
7.
Druk op <ENTER>.
Om de ventilatormodus in te stellen:
1.
Druk herhaaldelijk op <MENU/ESC> om naar het hoofdniveau van het displaymenu te
gaan.
2.
Gebruik <UP> of <DOWN> om System Setup te selecteren.
3.
Druk op <ENTER>.
4.
Gebruik <UP> of <DOWN> om Fan Mode te selecteren.
5.
Druk op <ENTER>.
6.
Gebruik <UP> of <DOWN> om te kiezen uit Auto Speed (de ventilatorsnelheid zal
reageren op de producttemperatuur) of High Speed (de ventilator blijft altijd draaien op de
hoogste snelheid).
7.
Druk op <ENTER>.
NEXT NXT-1 Gebruikershandleiding Rev. 7

Publicité

Table des Matières
loading

Table des Matières