Opex Omation 210 Série Manuel D'utilisation page 90

4.1.2. Output tray position
The position of the output tray can be adjusted for processing larger
envelopes. Simply lift the output tray up, move it to the desired position, and
press it down onto the stepped tray hitch (see Figure 4-10 through Figure 4-
12).
The output tray can be locked in one of three positions:
a. Against the machine (Figure 4-10).
Output tray
against machine
Figure 4-10: Output tray against the machine
Note: If you were referenced here by the operation chapter, to return
click here
to the next step.
Operation 45
Omation Series 210™ Envelopener® Operator Manual
OPEX Corporation