Opex Omation 210 Série Manuel D'utilisation page 78

2. When you first connect the power cable, the Yellow Chip Bin Full Indicator
Light may flash (Figure 4-2).This is because the machine cannot determine
if the chip bin is full and needs to be emptied. Open the Chip Bin and empty
the chips (if any). Removal and replacement of the chip bin resets the
indicator (Figure 4-3). An internal counter (not the one on the display) will
count up to 3500 envelopes before flashing again to inform you to empty
the chip bin.
Chip bin light flashes rapidly
Figure 4-2: Flashing chip bin light
Figure 4-3: Opening the Chip Bin tray
Operation 39
Omation Series 210™ Envelopener® Operator Manual
OPEX Corporation