Opex Omation 210 Série Manuel D'utilisation page 84

6. Load a handful of mail (approximately 25-50 pieces) onto the Envelope
Feed Hopper (Figure 4-6).
Figure 4-6: Loading the Envelope Feed Hopper
7. Be sure the top side of the mail to be cut is flush against the back of the
Feed Hopper (Figure 4-7).
Figure 4-7: Mail flush against Feed Hopper wall
42
Omation Series 210™ Envelopener® Operator Manual
Try to get mail flush against back wall
OPEX Corporation
Operation