Introduction; About This Manual - Opex Omation 210 Série Manuel D'utilisation

1.1. About This Manual

Read all information thoroughly before attempting to operate this equipment.
This manual contains information about the OPEX Omation Series 210
®
Envelopener and its operational procedures and safety-related components,
including:
• safety information, safety hazards and precautions
• main component identification and function
• system specifications
• minor maintenance and cleaning
This information is intended for use by the main operator of the Omation Series
™
210 Envelopener
start the machine which will cut open and/or count the envelopes. They can
also perform minor maintenance. Note that the operator is not qualified to
perform the following duties (additional training is required for these skill
levels):
•
Affected Employee
operate or use a machine or equipment on which the servicing or
maintenance is being performed, or whose job requires him/her to work in
an area in which such servicing or maintenance is being performed.
•
Authorized Employee
the machine or equipment.
This manual will be updated to reflect equipment design changes, part number
changes, or to correct errors (a table detailing the document revision history
can be viewed on
manual for your reference. The latest release can be downloaded in PDF
format at
www.opexservice.com
14
Omation Series 210™ Envelopener® Operator Manual
WARNING
®
. The operator can load envelopes onto the feed hopper,
- An employee whose job requires him or her to
- A person performing service or maintenance on
9). Be sure to retain the latest electronic release of the
page
(authorized, registered users only).
OPEX Corporation
™

Introduction