Opex Omation 210 Série Manuel D'utilisation page 100

3. Continue lifting the cover off on the left side to remove it (Figure 4-15).
Figure 4-15: Lifting the Nip arm cover
Note: If you were referred to this section from "Adjusting Cutter Depth,"
to return to that section.
click here
4. Lift the Nip arm wheels to clean under them (Figure 4-16).
Figure 4-16: Cleaning the nip wheels
50 Operation
Omation Series 210™ Envelopener® Operator Manual
OPEX Corporation