Bosch GTL 3 Professional Notice Originale page 15

OBJ_BUCH-828-006.book Page 15 Friday, July 1, 2016 12:52 PM
 Do not operate the measuring tool in explosive en-
vironments, such as in the presence of flammable
liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
Keep the measuring tool and the ceiling
measurement plate 14 away from cardi-
ac pacemakers. The magnets 4 on the un-
derside of the measuring tool as well as
the magnets on the ceiling measurement
plate generate a field that can impair the
function of cardiac pacemakers.
 Keep the measuring tool and the ceiling measure-
ment plate 14 away from magnetic data medium
and magnetically-sensitive equipment. The effect of
the magnets 4 on the underside of the measuring tool
and the magnets on the ceiling measurement plate can
lead to irreversible data loss.
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of
the measuring tool and leave it unfolded while reading the
operating instructions.
Intended Use
The measuring tool is intended for determining and
checking right angles as well as for aligning tiles in angles
of 45° and 90°.
Product Features
The numbering of the product features shown refers to
the illustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 Laser warning label
3 On/Off button
4 Magnets
5 Serial number
6 Battery lid
7 Latch of battery lid
8 Battery indicator
9 Laser target plate
Bosch Power Tools
10 Levelling plate
11 Cut-out in the levelling plate
12 Protective pouch
13 Laser viewing glasses*
14 Ceiling measurement plate*
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of acces-
sories can be found in our accessories program.
Technical Data
Tile laser
Article number
Working range (with laser target
plate or with ceiling plate)
Angular accuracy
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Divergence
– Laser line
C
6
Batteries
Operating life time
– with 2 laser lines
– with 3 laser lines
Automatic switch-off after approx.
Weight according to
EPTA-Procedure 01:2014
Dimensions
Degree of protection
1) The working range can be decreased by unfavourable environ-
mental conditions (e.g. direct sun irradiation).
2) The angular accuracy between the 45° laser line and the 90° la-
ser line is max. ±0.4 mm/m.
The measuring tool can be clearly identified with the serial number
5 on the type plate.
English | 15
GTL 3
3 601 K15 200
1)
20 m
2)
±0.2 mm/m
– 10 °C ... +50 °C
– 20 °C ... +70 °C
90 %
2
635 nm, <1 mW
0.5 mrad (full angle)
1
4 x 1.5 V LR6 (AA)
18 h
12 h
30 min
0.44 kg
156 x 102 x 98 mm
IP 54 (dust and
splash water
protected)
1 609 92A 1Z2 | (1.7.16)