Troubleshooting; Installation - Electrolux EMM15150 Notice D'utilisation

10. TROUBLESHOOTING

WARNING!
Refer to the Safety chapters.
Problem
The appliance does
not operate.
The appliance does
not operate.
The appliance does
not operate.
The appliance does
not operate.
The lamp does not
operate.
There is sparking in
the cavity.
There is sparking in
the cavity.
The turntable set
makes scratching or
grinding noise.
The appliance stop
to operate without a
clear reason.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
customer service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

11. INSTALLATION

CAUTION!
Do not block the air vents. If you
do that, the appliance can over-
heat.
Possible cause
The appliance is deactiva-
ted.
The appliance is not plug-
ged in.
The fuse in the fuse box is
blown.
The door is not closed prop-
erly.
The lamp is defective.
There are metal dishes or
dishes with metal trim.
There are metal skewers or
aluminium foil that touches
the interior walls.
There is an object or dirt be-
low the glass cooking tray.
There is a malfunction.
Activate the appliance.
Plug in the appliance.
Check the fuse. If the fuse
blows more than one time,
contact a qualified electri-
cian.
Make sure that nothing
blocks the door.
The lamp has to be replace.
Remove the dish from the
appliance.
Make sure that the skewers
and foil does not touch the
interior walls.
Clean the area below the
glass cooking tray.
If this situation repeats call
the customer service center.
The necessary data for the customer
service center is on the rating plate on the
appliance.
.........................................
.........................................
.........................................
CAUTION!
Do not connect the appliance to
adapters or extension leads. This
can cause overloading and risk of
fire.
ENGLISH 23
Remedy