Publicité
Les langues disponibles
Les langues disponibles
LOGIC ADJUSTMENTS
Trimmer
Function
OPENING
TM1
SPEED
CLOSING
TM2
SPEED
OPENING
TM3
TORQUE
CLOSING
TM4
TORQUE
OPENING
TM5
SOFT STOP
CLOSING
TM6
SOFT STOP
AUTO CLOSE
TM7
DELAY
Dip switch SW1
1
EMERGENCY
ELECTRO-
2
LOCK
BATTERY
3
OPENING
4
TCA
5
INCREASE
6
FUNCTION
7
ENTRANCE
CH/PP
FUNCTION
8
ENTRANCE
AUXILIARY
9
10
Description
Adjusts Opening Speed.
Adjusts Closing Speed.
Adjusts Opening Torque.
Adjusts Closing Torque.
Adjusts Length of Opening Soft Stop.
Adjusts Length of Closing Soft Stop.
Adjusts Auto Close Delay.
ON Enables opening with always closed program.
OFF Disables opening with always closed program.
Enables the electric lock when the automation is closed, regardless
ON
of the selected program.
Enables the electric lock when the automation is closed only with
OFF
the "always closed" program.
If there is no voltage, the automation performs the manoeuvres
ON
normally. If the battery is flat, the board switches off.
If there is no voltage, the automation performs the manoeuvres
OFF
normally. Before the battery is fully discharged, it performs an
opening manoeuvre.
ON
OFF Keep the Dip switch in OFF
With a high flow of passages, the automatic closing time is auto-
ON
matically increased.
OFF Function disabled, the automatic closing time remains unchanged.
ON
OFF Keep the Dip switch in OFF
ON Enables the Step-by-Step function on input 21.
OFF Enables the CLOSING function on input 21.
ON Enables the STOP function on AUXILIARY input.
OFF Enables the BREAK function on AUXILIARY input.
ON
OFF Keep the Dip switch in OFF
ON
OFF Keep the Dip switch in OFF
DC16
25
Publicité
