tau DC16 Notice D'installation page 22

Terminals Input/Output
PHOTOCELLS
16 - 19
1 PAIR (N.C.)
st
(19= Common)
PHOTOCELLS
17 - 19
2 PAIR (N.C.)
st
(19= Common)
EMERGENCY
19 - 20 (N.C.)
(19= Common)
CLOSE/LATCHING
RELAY
(N.O.)
19 - 21
DIP # 7 on SW1 on
OFF
(19= Common)
CLOSE/LATCHING
RELAY
(N.O.)
19 - 21
DIP # 7 on SW1 on
ON
(19= Common)
22 - 23 NOT USED
SIDE SENSOR
22 - 24
(N.C.)
(22= Common)
STOP/
ANTI-PANIC
22 - 25
(N.C.)
(22= Common)
NOTE: The STOP lock/function blocks any movement in progress of the automation,
while the ANTI-PANIC lock/function stops the movement in progress of the auto-
mation and then resumes with a slow closing once the function is restored.
22
Door Status Function
Closed None.
Opening None.
Reverts motion and opens.
Closing
Open Door won't close until photocells are released.
In pause None.
None.
Closed
Opening None.
Closing Reverts motion and opens.
Door won't close until photocells are released.
Open
In pause None.
Opens in any program, except in "LOCKED".
When dip # 1 on SW1 is set on ON opens also in
Closed
"LOCKED".
Opening None.
Reverts motion and opens.
Closing
Open Door won't close until input is released.
In pause None.
None.
Closed
Opening Reverts motion and opens.
Closing None.
Closes in any program, except in "HOLD OPEN".
Open
In pause None.
Closed Opens in any program, except in "LOCK".
Reverts motion and closes, except in "HOLD OPEN".
Opening
Closing Reverts motion and opens, except in "LOCK".
Closes in any program, except in "HOLD OPEN".
Open
IMPORTANT: Auto Close function is disabled.
In pause Closes.
Closed None.
Opening Opening continues at reduced speed.
None.
Closing
Open None.
In pause None.
Closed The door does not open so long as the input is busy.
Opening It stops the automation.
Closing It stops the automation.
Open The door does not close so long as the input is busy.
The door does not open so long as the input is
busy. Once free, the door closes at reduced speed
In pause
after 5 seconds.
DC16