3. Haal de koepel uit de koepelring.
4. Zet de getinte koepel in de koepelring.
5. Zet de borgring aan de onderkant van de koepelring en zet de 4 vastzetschroeven vast.
6.8 Exchange of microSD card (only IPCB34500, IPCB74500)
The exchange of the built in microSD card must be done in disconnected condition.
After loosening and removing the dome head, the pre-installed microSD card can be seen inside
the housing. This card can be exchanged for a card with a different capacity. To remove, gently
press the micro SD card, this will release the card from the socket. On inserting and pushing the
card, the card will snap in automatically.
Max. Kapazität: 128 GByte
152