Technical Data - AEG ABB68811LS Notice D'utilisation

26 www.aeg.com
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature
range. If you have any
doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.
8.3 Ventilation requirements
The airflow behind the appliance must
be sufficient.
5 cm

9. TECHNICAL DATA

9.1 Technical data
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information is situated in
the rating plate, on the external or
min.
200 cm 2
min.
200 cm 2
8.4 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
mm
mm
mm
Hours
Volts
Hz
internal side of the appliance and in the
energy label.
873
540
549
20
230 - 240
50