Double Sided; Single Sided - Bodet Time 5 Notice D'installation

3.1.2 Double Sided:

Connect the Ethernet cable from the client's network to the RJ45 socket of one clock (master).
Connect the supplied RJ12 cable to the RJ12 sockets of both clocks.
RJ12 connector
3.2 100-240 VAC Clocks

3.2.1 Single sided:

3.2.1.1 Grounding
Earth from main wire bundle
(client wiring)
Connect this earth to the bracket arm*
Note: Fit a cable lug
3.2.1.2 Power supply and synchronisation connections
The power supply and synchronisation connections are done directly form the client installation
wiring.
RJ12 cable
Connect this earth to clock bracket 1
Bracket side plate 1
Clock bracket 1
(ex. Style 10)
*CAUTION: If the bracket arm requires shortening, the earth
connection must be moved and reconnected to the bracket
arm. For aesthetic purposes, refit the earth cable lug near
the cut-off so that it is hidden by the clock.
RJ12 connector
Client Ethernet cable
Connect this earth to bracket side plate 1
Connect this earth to bracket side plate 2
Rear casing (single side only)
RJ45 connector
Bracket side plate 2
EN
7