User Mode; Ignition Of The Stove; Stove In Operation; Run Mode - Bronpi BIO ELSA Instructions D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
By pressing the key
the display lights up and the main screen appears (see drawing D68):
Time and Date
Radio Room Temperature
10.3.

USER MODE

The normal operation of the remote control is explained below according the functions available.
Before the ignition, the screen of the remote control shows the message of drawing D69. It only shows the
room temperature and the current time.
Mon 13:22
Ignition
18º
22º
º
D70
The display shows the time, the working power and the room temperature.
Mon 13:22
Radio
Room
Thermostat
Set: 25º C
D72
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
San 14:26
Chrono Enable
Combustion Power
Heating Power
L
Air Flow Direction

10.3.1. IGNITION OF THE STOVE

In order to ignite the stove, simply press the key
Firstly, the stove carries out an initial check-up and continues the ignition
process. After this, the display shows the message "IGNITION" (see
drawing D70).
The maximum duration of the ignition phase is 20 minutes. If after this time
there is not flame, the stove will automatically activate the alarm state and the
display will show the alarm message "Er12".

10.3.2. STOVE IN OPERATION

Once certain smoke temperature has been reached, the hot air fan starts
working and the leds will light up according to the power of the fan. Once
the ignition phase has been finished, the stove enters into "Run Mode" which
represents the normal operating mode (see drawing D71).

10.3.3. ADJUSTMENT OF THE ROOM TEMPERATURE

In the initial screen, by pressing the keys
This modification is only possible in the initial screen, inside the user menu. This option is inside a specific
menu. The value introduced is automatically saved in the memory when you exit from this option or pressing
the key SET (see drawing D72).
Er02
D
Off
18º
20º
º
M
M
R
Remote
D68
during a few seconds.
it is possible to select the temperature desired for the room.
46
Battery Charge
Error Code
State System
Room Radio Thermostat
Radio Configuration
Mon 13:22
OFF
18º
Mon 13:22

Run Mode

18º
ELSA, PAULA, BRENDA AND BRENDA-E
22º
º
D69
22º
º
D71

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bio paulaBio brendaBio brenda-e

Table des Matières