Using The Video Door Phone; Settings - Extel WEVPMH 001 Guide D'installation Et D'utilisation

8
INSTRUCTIONS FOR USE
a. Using the video door phone
The LCD screen of the panel presents simultaneously the 2 following screens:
with the 8 and 0 keys)
Then enter the No. of the dwelling.
monitor "TALK" key to communicate with him.
monitor off.
(Caution, the max. number of monitors on which can be viewed at the same time the video of the roadside panel is limited,
see chapter 9 "configuration").
Note that the time outs indicated below are settable in the "general configuration" menu – "9- timing". (chapter 9)
Note that the opening function is only valid if the screen is turned on and in communication mode.
b. Settings
Setting audio volumes.
You can access a 1st setting by the menu of the roadside panel.
On the keypad type #9008, administrator code ("66666666
Fig 1
12GB
9" and "#" to access the list of names. (navigate in the menu
monitor" key.
monitor".
unlock" key,
Fig 2
CFI EXTEL WEVPMH 001 - 03/2010 - V1
monitor" key to turn the
Fig 3