Intercommunication Between Monitors Of Different Dwellings; Additional Menus On The Roadside Panel - Extel WEVPMH 001 Guide D'installation Et D'utilisation

2" then #
1# then *
Talk" key of the corresponding monitor.
1 and 4 keys.
3 and 6 keys.
Talk" key of the monitor.
#9009.
It is also possible to modify the sound level of a single monitor.
See setting Chapter 10
c. Intercommunication between monitors of different dwellings
To communicate between 2 monitors (of a same dwelling or between dwellings), press the "call" key, a menu opens.
Select "appel intercom" and validate with the ">" key
Type the No. of the monitor you want to call with the <, >, +, - keys
Then press the "Talk" key of the monitor.
A ring tone is emitted on the called monitor, and then just press the "Talk" key of the monitor to answer.
Note that a call from the roadside panel has priority and that the current communication will be stopped between moni-
tor.
9

ADDITIONAL MENUS ON THE ROADSIDE PANEL

66666666".
Key #
Key * to cancel or return to previous menu.
To enter the "configuration" menu, on the keypad type #8001, administrator code
1- Non used
2- Non used
SW1
is in position I or ON
4- Determines the maximum number of monitors to be in surveillance mode at
the same time
5- Non used
6- Non used
7- Allows selecting the number of characters to type on the keypad (by default 4)
to select the No. of the dwelling (enter the menu, type "0" for 4 characters,
"1" for 3 characters, "2" for 2 characters)
8- Allows modifying the administrator code (factory "66666666")
CFI EXTEL WEVPMH 001 - 03/2010 - V1
13GB