Bosch Indego Notice Originale page 39

OBJ_BUCH-1573-008.book Page 39 Tuesday, October 27, 2015 10:35 AM
PIN Code
Please set up PIN Code
Select "Proceed" to enter your personal PIN Code.
PIN Code
Enter new PIN:
0 – – –
Back
Select the input position with the left/right cursors, adjust the
digits with the up/down cursors and confirm with "Enter" or
select "Back" to return to the first "PIN Code" screen.
Please make a note of your PIN Code-
PIN CODE
here.
Note: Keep the PIN code secret from third parties.
If you have lost your personal PIN code, you will have to return
the Indego and its docking station to a Bosch Service Center
to be unlocked. Please contact your dealer or Bosch (see "Af-
ter-sales Service and Application Service").
Date & Time
hh:mm
dd/mm/yy
Format: 12 hr
Back
Bosch Power Tools
Select the "hh:mm", "dd/mm/yy" and "Format: 12 hr" input
positions with the left/right cursors, adjust the values with the
up/down cursors and confirm with "Save" or select "Back" to
return to the first "PIN code" screen.
Proceed
Press "Follow Wire" to map the garden.
(Select "Back" to return to the "Date & Time" screen.)
Note: If the Indicator on the docking station flashes at this
point the perimeter wire is broken, too long (above 450 m) or
too short (below 20 m).
Enter
The following screen indicates the initial follow of perimeter
wire:
Save
The blades do not rotate when the machine follows the wire
for the first time.
Installation
Please press Follow Wire to
complete installation process
Follow
Back
Wire
Installation
Step Back
Machine is about to start. Wire
being followed...
Mower Status
Mapping the garden ...
Back
F 016 L81 517 | (27.10.15)
English | 39