Failure Display And Inspection; Technical Specification - Signature STI3MG Instructions D'utilisation

Failure Display and Inspection

If an abnormality comes up, the induction hob will enter the protective
state automatically and display corresponding protective codes:
Problem Possible causes
F3 - F8
F9 - FE
E1 / E2
E3 / E4
E5 / E6

Technical Specification

Model
Supply Voltage
Product Size (L*P*H)
Building-in Dimensions (L*P)
N.W.
Power
Power of zone
Temperature sensor failure
Temperature sensor of the
IGBT failure.
Abnormal supply voltage
Abnormal temperature
Bad induction hob heat
radiation
What to do
Please contact the
supplier.
Please inspect whether
power supply is normal.
Power on after the power
supply is normal.
Please inspect the pot.
Please restart after the
induction hob cools down.
STI3MG
220V-240V / 50Hz
590 x 520 x 56.5 mm
560 x 490 mm
9,0 kg
7100 W
Left front : 1500 W (140 mm)
Left back : 2000 W (180 mm)
right : 3000 W (280 mm)
3600 W (boost)
- 46 -