USING YOUR APPLIANCE
EN 10
At the end of the (programmed) cooking time:
• the oven stops,
• display flashes,
• a series of beeps are emitted for a few minutes. The beeps can be
stopped by pressing any button.
Note:
All cooking is done with the door closed. After a cooking cycle, the
cooling fan continues to run for a time, in order to guarantee optimum
oven reliability.
Cooking with delayed start and selected end of cooking time
Proceed as for programmed cooking.
• Press the time button until the cooking end time indicator flashes.
The end of cooking time indicator flashes to indicate that it may
now be set.
• Turn the knob to set the end of cooking time.
Example: end of cooking time 1h30 p.m.
• Press the knob to confirm. The end of cooking time will automatically
be saved in the appliance's memory after a few seconds.
The end of cooking time display stops flashing.
The display returns to the time of day.
An animated display indicates that the oven is in delayed cooking
mode.
The light inside the oven comes on when cooking starts and goes
out at the end of cooking.
Once these 3 steps have been completed, the oven heating start time
is delayed so that cooking ends at 13h30.
At the end of the (programmed) cooking time:
• The oven stops and the cooking time symbol and 0h00 flash.
• A series of beeps are emitted for a few minutes. The beeps can be
stopped by pressing any button.