Maintenance, Storage And Cleaning; Disposal - Parkside PAS 4 C4 Traduction Des Instructions D'origine

Maintenance, storage and
cleaning
WARNING! RISK OF ELECTRIC
SHOCK! Before cleaning, disconnect
the charger
NOTE
► Before carrying out any work on the
appliance, ensure that the rotation direction
switch is in the middle. This prevents
unintentional switching on.
The cordless screwdriver is maintenance-free.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ Never allow liquids to get into the appliance.
■ Use a cloth to clean the housing. Never use
petrol, solvents or cleansers which can damage
plastic.
WARNING!
■ Remove the attachments before cleaning.
Clean them with a dry cloth.
■ Always ensure the appliance and attach-
ments are clean, free of dust and dry before
storing.

Disposal

The packaging is made from environmen-
tally friendly material and can be disposed
of at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
In accordance with European Directive
2012/19/EU on Waste Electrical and Electronic
Equipment and its integration into national law,
used power tools must be disposed of separately
and recycled in an environmentally friendly manner.
Your local community or municipal authorities
can provide information on how to dispose of the
appliance.
PAS 4 C4
from the mains socket.
Do not dispose of batteries in your
normal domestic waste!
NOTE
► The integrated rechargeable battery in this
appliance cannot be removed for disposal.
► The integrated lithium-ion battery may only
be removed by trained personnel. To remove
the battery from the housing, the battery must
be empty and the screws unscrewed from the
housing. The connections on the battery must
individually disconnected and isolated.
Defective or worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC.
Take the battery pack and/or appliance to a
nearby collection facility.
Please consult your local authorities regarding
suitable disposal of worn out power tools/bat-
tery packs.The integrated lithium-ion battery may
only be removed by trained personnel. To remove
the battery from the housing, the battery must be
empty and the screws unscrewed from the housing.
The connections on the battery must individually
disconnected and isolated.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
GB │ IE │
21 ■