Installation And Commissioning - Gira 2330 02 Notice D'installation Et D'utilisation

3

Installation and commissioning

30
Depending on the design, the
1
smoke detector will be fitted using
a mounting plate (only for battery
operation) or an optional 230 V
base (battery as backup power).
2
If using a 230 V base, please
3
follow the instructions in the
corresponding Installation and
User Manual.
1) Before attaching the mounting
plate, cut out the prepunched
slot for the cable feed using a
4
suitable knife.
5
2) Mount the mounting plate with
the enclosed mounting
6
material.
1 Dowel
2 Mounting plate
3 Cable slot (pre-punched)
4 Screws
5 Module interface
6 Block battery (9 V)
7 Smoke alarm device
7