Maintenance And Care - Gira 2330 02 Notice D'installation Et D'utilisation

6

Maintenance and care

In order to ensure the functional reliability of the smoke alarm device for
a longer period, you should carry out maintenance once a month (or
immediately when a fault message occurs):
1) Remove the smoke alarm device from the mounting plate (turn
counter-clockwise) and remove any dust.
2) Wipe the smoke alarm device with a damp lint-free cloth.
3) Insert the smoke alarm device back into the mounting plate and turn it
clockwise until it is secured.
4) Carry out a function test (Section 7).
Note
Replace the smoke alarm device on the date specified on the device
label.
If carrying out renovations in the room, the smoke alarm device must be
completely covered with the plastic cover supplied.
Do not forget to remove the plastic cover again after completing the
renovation work!
Attention
The smoke alarm device must not be painted!
38