Gossen MetraWatt METRAVOLT VT 1500 Mode D'emploi page 30

8.2 Periodic Testing
According to EN 61243-3 it is recommended to carry
out repeated examinations.
It should not exceed the time limit of 6 years.
Depending on operation conditions and frequency,
inspection at an earlier date may be recommendable.
The serial number with the date of manufacture
(WWYYNN=Week Year Number) is embossed on the
back of the device, close to the belt clip. Periodic tests
are offered by the manufacturer and indicated on the
inspection plate.
8.3 Device Return and Environmentally Compatible
Disposal
The instrument is a category 9 product (monitoring
and control instrument) in accordance with ElektroG
(German Electrical and Electronic Device Law). This
device is subject to the WEEE directive. Furthermore,
we make reference to the fact that the current status
in this regard can be accessed on the Internet at www.
gossenmetrawatt.com by entering the search term
WEEE.
We identify our electrical and electronic devices
in accordance with WEEE 2012/19/EU and
ElektroG with the symbol shown to the right
per DIN EN 50419.
These devices may not be disposed of with the trash.
Please contact our service department regarding the
return of old devices, address see chapter 9.
9. Repair and Replacement Parts Service
Calibration Center and Rental Instrument Service
When you need service, please contact:
GMC-I Service GmbH
Service Center
Beuthener Straße 41
90471 Nürnberg
Germany
Phone +49 911 817718-0
Fax +49 911 817718-253
E-Mail service@gossenmetrawatt.com
www.gmci-service.com
This address is only valid in Germany.
Please contact our representatives or subsidiaries for
service in other countries.
10. Product Support
When you need service, please contact:
Gossen Metrawatt GmbH
Hotline Produktsupport
Phone +49 911 8602-0
Fax +49 911 8602-709
E-Mail support@gossenmetrawatt.com
30